Articles

Bolt Cutter uses

IMG 0849 copy 1 scaled

【Festar Tools】USA Brand - Designed in Japan, Made in Taiwan


Why do you need Bolt Cutters? Bolt Cutters Usage?

Bolt cutter, also known as lock cutter is usually divided into 8, 12, 14, 18, 24, 30, 36, 42 inches. The application of bolt cutter is differentiated by its sizes. The scope of the bolt cutter can be widely used in many sides, ranging from trimming the wire of the flower pot at home or cutting the lock when loses the key, to the firefighters cutting the iron window and iron door to save people in case of an accident. Next, Festar will lead you step by step to understand the use of bolt cutter and why it is needed.

Due to different length and different size of the blade of bolt cutters, the usage will also be different. The longer the bolt cutter the bigger the leverage and also the size of the blade will also be bigger. Hence, it will be easier to cut with bigger size and also bigger size means it can cut thicker things. However, most people don’t know which size to buy, so what happen is they get bolt cutter that’s too small which is unable to cut thicker things. It is very important to choose the right size for your project, so now let this guide teach you how to choose the correct size that fits your project.

Bolt cutter 8 inches:

The 8 inch bolt cutter is the smallest at present, which can cut screws, threaded rods, wires and chains with a diameter of 3/16 inches (4.7mm) in diameter.

The 12 inch bolt cutter can cut nails, threaded rods, iron wires, chains, screws and fences up to 15/64 inches (5mm) in diameter. Compare with others’ product, we can cut something with a hardness of about Hrc 35, but if we want to cut something so hard, the maximum diameter can only be cut to 3/16 inch (4mm). Because our blades adopt heat treatment technology that is taught by the Japanese master himself, the hardness of the blades can reach HrC 45, and the hardness of the cutting edges can reach HrC 58. And because the high frequency technology is different from others, our blades will not easily break, causing danger to customers.

The 14 inch bolt cutter can cut small padlocks, rivets, screws, threaded rods, iron wires, chains and fences with a diameter of 9/32 inches (7mm). Compare with others’ product, we can cut something with a hardness of about Hrc 35, but if we want to cut something so hard, the maximum diameter can only be cut to 7/32 inch (5mm).Because our blades adopt heat treatment technology that is taught by the Japanese master himself, the hardness of the blades can reach HrC 45, and the hardness of the cutting edges can reach HrC 58. And because the high frequency technology is different from others, our blades will not easily break, causing danger to customers.

The 18 inch bolt cutter can cut rust galvanized cages, padlocks, locks, cables, galvanized steel wires, screws, threaded rods, iron wires, chains, trailer seals, fences with a diameter of 5/16 inch (8mm). Compare with others’ product, we can cut something with a hardness of about Hrc 35, but if we want to cut something so hard, the maximum diameter can only be cut to 1/4 inch (6mm). Because our blades adopt heat treatment technology that is taught by the Japanese master himself, the hardness of the blades can reach HrC 45, and the hardness of the cutting edges can reach HrC 58. And because the high frequency technology is different from others, our blades will not easily break, causing danger to customers.

The 24 inch bolt cutter can cut rust galvanized cage, padlock, lock, cable, galvanized steel wire, screw, threaded rod, iron wire, chain, trailer seal with a diameter of 3/8 inch(10mm). Compare with others’ 24 inch bolt cutter, we can cut something with a hardness of about Hrc 35, but if we want to cut something so hard, the maximum diameter can only be cut to 5/16 inch (8mm). Because our blades adopt heat treatment technology that is taught by the Japanese master himself, the hardness of the blades can reach HrC 45, and the hardness of the cutting edges can reach HrC 58. And because the high frequency technology is different from others, our blades will not easily break, causing danger to customers.

The 30 inch bolt cutter can cut rust galvanized cage, padlock, lock, cable, galvanized steel wire, threaded rod, chain, trailer seal with a diameter of 1/2inch(13mm). Compare with others’ 30 inch bolt cutter, we can cut something with a hardness of about Hrc 35, but if we want to cut something so hard, the maximum diameter can only be cut to 3/8 inch (10mm). Because our blades adopt heat treatment technology that is taught by the Japanese master himself, the hardness of the blades can reach HrC 45, and the hardness of the cutting edges can reach HrC 58. And because the high frequency technology is different from others, our blades will not easily break, causing danger to customers.

Bolt cutter 36 inches:

The 36 inch bolt cutter can cut the rust galvanized cage, padlock, lock, cable, galvanized steel wire, threaded rod, chain, trailer seal with a diameter of 5/8 inch(16mm).

Bolt cutter 42 inches:

The 42 inch bolt cutter can cut rust galvanized cage, padlock, lock, cable, galvanized steel wire, threaded rod, chain, trailer seal, with a diameter of 11/16 inch (18mm).


How to use Festar bolt cutter?

Method 1:

If the object to be cut cannot be placed on the ground or only one person is working then please do the following steps:

  1. First of all, for your own safety, please wear goggles and working gloves.
  2. Hold the handle tightly with both hands.
  3. If you want to cut accurately, you can use a marker to draw a line on the object you are cutting.
  4. Open the grip, slowly close it and let the blade align it with the line to be cut. Try to avoid using the top and end of the blade for cutting. The best cutting position is slightly behind middle of blade. Please note that Festar bolt cutter is a center cutting design, so it can be cut in this way. There are also different designs on the market, such as nipper. Customers should pay attention to this when using.
  5. If the object you are cutting is too large and you are not able to move it into the middle position or it cannot be cut, please do not use any tool to extend the handle of the bolt cutter to extend the leverage. Instead, you should use a larger bolt cutter to complete the operation.

Method 2:

If the object to be cut can be placed on the ground (another person is recommended to help) then please do the following steps:

  1. Place the bolt cutter on the ground, with one foot stepping on one handle and hold the other handle with both hands.
  2. Try to pull the handle up to open up the blade or press it down to close the blade, and confirm you won’t slip off during the operation. Please try several times to find the most comfortable and easy position.
  3. After confirming the position, open up the blade and have the other person take the marker to draw a line on the object you are cutting, and then slowly clamp the blade down to the object to be cut.
  4. After fixing the object, ask the other person to not stand nearby the object to avoid the object being shot out after being cut.
  5. When cutting, you can slowly press down a little at a time. Please do not sit on the grip to increase your strength. The safest way is to firmly hold the grip and slowly press down with your body weight.
  6. If the object you are cutting is too large and you are not able to move it into the middle position or it cannot be cut, please do not use any tool to extend the handle of the bolt cutter to extend the leverage. Instead, you should use a larger bolt cutter to complete the operation.


The ways of adjusting Festar bolt cutters?

Festar not only has the most advanced processing technology, but also uses the best raw materials. Any tool will be loose or need to be adjusted after being used for a long time. Because some tool brands are not user-friendly in design, many customers will return the product or buy a new one once it is loose, which is what Festar wants to avoid. For us, every product we make has a soul, and every product is made for the best and longest service to our customers. Therefore, we will make our customers fully understand how to use our products, and let customers use our products the simplest way in design.


How to adjust blade?

Any bolt cutter that have been used for a long time will encounter the problem that the two blades are opening more and more. If they continue to open more and more, they will find it more and more difficult to cut things when using them. Many customers will think that the blade is blunt, but the real reason is that the blade is not adjusted. Festar bolt cutter has made great technical efforts in this respect. Many other brands have no way to adjust it, or the adjustment method is very complex. Festar bolt cutter only needs two steps to complete the adjustment. Next, let's teach you how to adjust the knife edge fit of Festar breaking shear in two steps.

Step 1: Loosen the screws:
Step 2: Turn the adjusting screw to adjust:

How to adjust too tight or loose blades?

Many people feel that the bolt cutter are a little tight when they first get it, or they will find that they are too loose after using them for a period of time. Even though Festar bolt cutter have quality control which fits customer the best, but each customer has different usage habits, so here we will teach customers how to adjust the tightness of the bolt cutter.

Step 1: Loosen the screws:

Step 2: Firstly adjust the left and right and then the middle:

Here we would like to emphasize that not every kind of bolt cutter can adjust the tightness in this way. Just after the adjustment, it should be found that if you want to adjust the tightness, not only the screws should have threads, but also the main part should have corresponding threads turned in. However, if you look at the market, it should be found that many bolt cutters do not have this screw pattern, they just install the screws, and even if they become loose over time, they cannot be adjusted. However, the thread design of Festar bolt cutter, which not only makes it convenient for customers to adjust the tightness, but also makes the structure of the whole bolt cutter more stable so that the bolt cutter can save more effort and the product life is longer.

Complete after-sales service of American brand, professional design of Japanese designers, and manufacture of Taiwan's top factory

* A Piece of Japanese Craftsmanship
Festar started a cooperation relationship with a Japanese hand tool brand technology under the occasion. Festar and their Japanese chief designer jointly designed this perfect product. In the design of the main part, our design can make it easier for customers to cut things and adjust products.

* Heavy-Duty and Guaranteed to Deliver Results
Developed through a meticulous process that ensures quality, this Japanese-patented bolt cutter features a premium design that allows users to adjust it easily and cut through things swiftly. Made of Chromium molybdenum, an advanced type of steel that’s known for its durability and impact-resistance, this tool promises longevity with proper maintenance.

* Forging technology inherited by Japanese master personally – more than 30 years of forging experience
Festar product design is a product designed by Japanese craftsmen after years of previous two generation products. In terms of product blades, the forging, tempering and heat treatment technologies what we used were personally taught by Japanese craftsmen who have 40 years professional experience. We overcame the total difficulties and studied and tested the most perfect internal and external hardness, so that the product can have the longest service life in use. In order to make customers more comfortable in usage, Festar has invested a lot of effort in testing the design of the handle, so that the handle will not easily break and cause injuries to users.

* Handle design
Guided by Engineering, FESTAR thoughtfully designed an ergonomic handle that makes certain ease of use, comfort, and the highest level of safety when using the tool.

* One year warranty, Quality Like No Other
Festar Tools has the highest confidence in the quality of our products. The production process of our products has passed international certification, such as German GS and international ISO. Manual final inspection will be took before shipping to customers. A one-year free warranty is provided for this product. As long as it is not intentionally damaged, you can contact the customer service to send the product back to our company to repair,so that you can not only buy it with ease, but also use it with more ease. For details, please refer to the product warranty statement on Festar's official website.


Warning: This product is a professional tool, it is recommended to wear relevant safety accessories when using, and do not make it easily accessible to children!
Origin: American brand, Japanese design, Made in Taiwan